View CPC1335_4510574.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CPC1335
Single Pole OptoMOS(R) Relay with Bi-directional Transient Protection
Parameters Blocking Voltage Load Current Max On-resistance LED Current to Operate Ratings 350 100 35 1 Units VP mA mA
Description
The CPC1335 is a single-pole normally open (1-Form-A) solid state relay with bi-directional transient voltage suppressor (TVS) relay protection, which is designed to meet the requirements of EN50130-4 (installation class 3). The relay output is constructed with efficient MOSFET switches and photovoltaic die that use Clare's patented OptoMOS architecture. The input, a highly efficient GaAlAS infrared LED, controls the optically coupled output. The CPC1335 is available in an 8-pin, space-saving surface-mount package.
Transient Protection Characteristics
Peak Pulse Power 600W VWM 40.2V
Features
* 100% Solid State * Low Drive Power Requirements (TTL/CMOS Compatible) * No Moving Parts * High Reliability * Arc-Free With No Snubbing Circuits * 3750Vrms Input/Output Isolation * No EMI/RFI Generation * Machine Insertable, Wave Solderable
Approvals
* UL Recognized Component: File #E76270 * EN/IEC 60950 Compliant * CSA Certified Component: Certificate # 1172007
Ordering Information Applications
* * * * * * * * * Security Sensor Circuitry Instrumentation Multiplexers Data Acquisition Electronic Switching I/O Subsystems Aerospace Industrial Controls
Part # CPC1335P CPC1335PTR Description 8-Pin Flatpack (50/Tube) 8-Pin Flatpack (1000/Reel)
Pin Configuration
1 2 + Control - Control 3 4 8 7 6 5 TVS +/TVS -/+ Load Load
Switching Characteristics of Normally Open (Form A) Devices
Control
ILOAD
+ 90% 10%+ tOFF tON
Pb
RoHS
2002/95/EC
e3
www.clare.com 1
DS-CPC1335-R05
CPC1335
Absolute Maximum Ratings
Parameter SSR Output Blocking Voltage TVS Working Voltage, Maximum (VWM) Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 SSR Output Power Dissipation 2 TVS Peak Pulse Power (PPP) (IPP=9.3A, 10/1000s pulse) Isolation Voltage Input to Output Operating Temperature Storage Temperature
1 2
Ratings 350 40.2 5 50 1 150 400 600 3750 -40 to +85 -40 to +125
Units VP V V mA A mW mW W Vrms C C
Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied.
Derate Linearly 1.33 mw / C Derate Linearly 6.67 mw / C
Electrical absolute maximum ratings are at 25C
Electrical Characteristics
Parameters Output Characteristics @ 25C Load Current Continuous 1 Peak On-resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25C Input Control Current 3 Input Voltage Drop Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance
1 2 3
Conditions
Symbol
Min
Typ
Max
Units
IF=2mA t=10ms IL=100mA VL=350V
IL ILPK RON ILEAK TON TOFF COUT IF VF IR CI/O
0.9 -
25 40 1.2 3
100 350 35 1 10 10 1 1.4 10 -
mA A
IF=2mA, VL=10V 50V; f=1MHz IL=100mA IF=5mA VR=5V -
ms pF mA V A pF
Load current derates linearly from 100 mA @ 25C to 70ma @ 85C Measurement taken within 1 second of on time For applications requiring high temp operation (greater than 60C) a minimum LED drive current of 3mA is recommended.
Electrical Characteristics: TVS
Parameters Output Characteristics @ 25C Clamping Voltage Reverse Breakdown Voltage Reverse Leakage Current Conditions IPP=9.3A I=1mA VWM=40.2V Symbol VC VBR IL Min 44.4 Typ Max 66.5 5 Units V V A
2
www.clare.com
R05
CPC1335
PERFORMANCE DATA*
CPC1335 Typical LED Forward Voltage Drop (N=50, TA=25C, IF=5mA)
25 20 15 10 5 0 0.30 0.35 0.40 0.45 0.50 0.55 LED Current (mA) 0.60
35 30 Device Count (N) 25 20 15 10 5 0
CPC1335 Typical IF for Switch Operation (N=50, TA=25C, IL=100mA)
25 20 15 10 5 0
CPC1335 Typical Turn-On Time (N=50, TA=25C, IL=100mA, IF=5mA)
1.17
1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V)
Device Count (N)
Device Count (N)
0.50
0.60
0.70 0.80 0.90 Turn-On (ms)
1.00
1.10
25 20 15 10 5 0
CPC1335 Typical Turn-Off Time (N=50, TA=25C, IL=100mA, IF=5mA)
35 30 Device Count (N)
CPC1335 Typical On-Resistance Distribution (N=50, TA=25C, IL=120mA)
35 30 Device Count (N) 25 20 15 10 5 0
CPC1335 Typical Blocking Voltage Distribution (N=50, TA=25C)
Device Count (N)
25 20 15 10 5 0
0.26
0.28
0.30 0.32 0.34 Turn-Off (ms)
0.36
0.38
26
27
28 29 30 On-Resistance ()
31
32
377
388
399 410 421 432 Blocking Voltage (VP)
443
CPC1335 Typical LED Forward Voltage Drop vs. Temperature
LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 Temperature (C) 100 120 3.0 2.5 Turn-On Time (s) 2.0 1.5
CPC1335 Typical Turn-On Time vs. Temperature (VL=10V)
Turn-Off Time (ms)
1.0 0.9
CPC1335 Typical Turn-Off Time vs. Temperature (VL=10V)
IF=1mA
0.8 0.7 0.6 0.5 0.4 0.3 IF=2mA IF=5mA
IF=1mA
IF=50mA IF=10mA IF=5mA
IF=2mA 1.0 0.5 0.0 -40 IF=5mA
-20
0
20 40 60 Temperature (C)
80
100
0.2 -40
-20
0
20 40 60 Temperature (C)
80
100
3500 3000 Turn-On Time (s)
CPC1335 Turn-On Time vs. LED Forward Current (TA=25C)
476 474 Turn-Off Time (s) 472 470 468 466 464 462
CPC1335 Typical Turn-Off vs. LED Forward Current (TA=25C)
0.28 0.24 0.20 0.16 0.12 0.08 -40
CPC1335 Typical LED Current to Operate vs. Temperature (IL=70mA)
2500 2000 1500 1000 500 0 0 10 20 30 40 LED Forward Current (mA) 50
0
10 20 30 40 LED Forward Current (mA)
50
LED Current (mA)
-20
0
20 40 60 Temperature (C)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R05
www.clare.com
3
CPC1335
PERFORMANCE DATA*
CPC1335 Typical On-Resistance vs. Temperature (IL=50mA, IF=3mA)
Blocking Voltage (VP)
CPC1335 Typical Blocking Voltage vs. Temperature
430 425 420 415 410 405 400 395 -40 -20 0 20 40 60 80 100 Load Current (mA) 180 160 140 120 100 80 60 40 20 0
CPC1335 Typical Load Current vs. Temperature
60 On-Resistance () 50 40 30 20 10 0
I F = 5mA I F = 2mA
-40
-20
0
20 40 60 Temperature (C)
80
100
-40
-20
0
20
40
60
80
100
120
Temperature (C)
Temperature (C)
0.016 0.014
CPC1335 Typical Leakage vs. Temperature Measured Across Pins 5 & 6 (VL=350V)
Load Current (mA)
150 100 50 0 -50 -100 -150
CPC1335 Typical Load Current vs. Load Voltage (TA=25C, IF=5mA)
CPC1335 Energy Rating Curve
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10s 100s 1ms 10ms 100ms Time
Leakage (A)
0.012 0.010 0.008 0.006 0.004 0.002 0 -40 -20 0 20 40 60 Temperature (C) 80 100
Load Current (A)
-3
-2
-1 0 1 Load Voltage (V)
2
3
1s
10s 100s
52 TVS Breakdown Voltage (V) Leakage Current (nA) 51 50 49 48 47 46 45 -40 -20 0 20 40 60 Temperature (C) 80 100
25 20 15 10 5
Peak Pulse Power (% PPP @ 25C)
CPC1335 TVS Diode Breakdown Voltage vs. Temperature (Pins 7 & 8)
CPC1335 TVS Diode Leakage vs. Temperature (Pins 7 & 8) (VL=40V)
CPC1335 TVS Derating Curve
120 100 80 60 40 20 0 -40 -20 0 20 40 60 Temperature (C) 80 100
0 -40
-20
0
20 40 60 Temperature (C)
80
100
CPC1335 TVS Pulse Waveform 10/1000 (s)
110 100 90 80 70 60 50 40 30 20 10 0 PPP - Peak Pulse Current (% IPP)
1
10
100
104 1000 Time (s)
105
106
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department.
4
www.clare.com
R05
CPC1335
Manufacturing Information
Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents.
Pb
RoHS
2002/95/EC
e3
MECHANICAL DIMENSIONS
8 Pin Flatpack Package
2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 9.398 0.127 (0.370 0.005) 2.159 TYP. (0.085 TYP.) 7.620 0.254 (0.300 0.010) 2.286 MAX. (0.090 MAX.)
Recommended PCB Land Pattern
2.54 (0.10)
0.635 0.127 (0.025 0.005) 1.55 (0.0610) 8.70 (0.3425)
0.203 (0.008) 8.077 0.127 (0.318 0.005) 9.652 0.381 (0.380 0.015) 2.159 TYP. (0.085 TYP.)
0.65 (0.0255)
0.457 0.076 (0.018 0.003)
Dimensions mm (inches)
Tape and Reel Packaging for 8 Pin Flatpack Package
W = 16.30 max (0.642 max) 330.2 DIA. (13.00 DIA.) 1 8 Bo = 10.30 (0.406) Top Cover Tape K0 = 2.70 (0.106) K1 = 2.00 (0.079)
Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.)
P = 12.00 (0.472)
Ao = 10.30 (0.406) Dimensions mm (inches)
Embossed Carrier
User Direction of Feed
Embossment
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1335-R05 (c)Copyright 2009, Clare, Inc. All rights reserved. Printed in USA. 3/9/09
5

▲Up To Search▲

Price & Availability of CPC1335

	To Download CPC1335 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .